Brother Printer Error Drum Light Flashing is that type of error in the brother printer while printing the documents. Brother printer is performing multi-functioning printer with upgraded technology. Brother printer comes up with various kinds of gains that the printer gives the user. When you are facing several kinds of printer error like Drum Light Flashing on your Brother Printer. The printer is not working due to various papers in the queue it leads to a printer pause situation facing by the user.
Brother Printer Error Drum Light Flashing Is the most ordinary error notification that appears when the drum counter had not been appropriately reset. It is compulsory to replace the last time so change it immediately.
Resolve Brother Printer Error Drum Light Flashing
Printer Wires for resolving the Brother Printer Error Drum Light Flashing:-
• Firstly, to solve the Brother Printer Error Drum Light Flashing the Examine whether the printer wires have accurately been plugged into the printer and the operating system. A printer scanner can scan the documents and convert them into digital format printing.
• Plug off the power wire at least wait for one minute and again plugging the printer wires into the printer. The operating system ensures that they are located in the accurate ports, so you don’t face any printer pause situation while printing.
Printer Driver for sort out the Brother Printer Error Drum Light Flashing:-
• Examine that you have the upgraded printer driver installed for your Brother Device.
• Now, If your Printer is appearing as a not knowing Device in your Operating System, then it’s time to reinstall your printer and resolve the problems, so you don’t face the printer not working.
• If you see multiple printers of the same model installed on your PC, ensure everybody uses the exact driver.
Reset Toner Cartridge for solving the Brother Printer Error Drum Light Flashing:-
• Disconnect any USB wires and remove any memory cards from the printer.
• Resume the computer.
• Now, Open the printer’s top panel, unlocking the ink cartridge’s locking clips, and deliberately take them out and locate them on a clean plane.
• Now, Unlock the blank ink cartridges locking clips, and close the printer.
• Now, Wait for at least 60 seconds before proceeding to the next steps.
• Re putting one ink cartridges only and print a test page by giving print command.
• If no printer error notifications are appeared put the other ink cartridge and assure that it is working by printing another test page.
Reset Drum for resolving the Brother Printer Error Drum Light Flashing:-
• Firstly, Eliminate the drum unit and toner cartridge. Wait for 2 minutes.
• Put back the drum unit and toner cartridges into the printer.
• Now, The drum LED continues to flash if the drum counter was not replaced properly when you changed the drum.
• At the moment, open the front cover of the printer. The printer helps in print, scan and fax the documents.
• Press and hold down the GO button for about only 4 seconds till all the LEDs light up.
• At one time, all 4 LEDs are lit. Tap the Go Button.
• Now close the front cover door.
• Your drum is now reset.
So, all these above solutions surely help you out. “How To Resolve Brother Printer Error Drum Light Flashing“. In any case, if you face any difficulties & inconvenience while representing, don’t delay and connect with us instantly, we will help you out for sure.